Teledyne API – Model T700 Dynamic Dilution Calibrator
Note
4.3.1.1. Activating a Sequence from the T700 Front Panel
06873B DCN6388
It is generally a good idea to end each calibration sequence with a
instruction followed by an instruction to return the instrument to
mode.
PURGE
Even if a
is not included, the last instruction in a sequence should
always be to place the T700 in
To create a sequence, use the instructions in the following sections to name the
sequence, set its associated parameters and define the steps to be included.
To activate an already programmed sequence from the front panel, press:
Overview of Operating Modes and Basic Operation
STANDBY
mode.
PURGE
STANDBY
121