Operation; Diagnostics - Teledyne VISION G2 CLASSIC 6 User Manual

Operation

Operation

Diagnostics

The Diagnostics button on the main menu screen launches the
Vision tester diagnostic procedure. When the Diagnostics
button is touched, a confirmation pop-up appears asking the
user if they wish to run diagnostics. If OK is touched, the
diagnostics will run. If Cancel is touched, the diagnostics will not
run, and the operator will be returned to the menu.
This procedure performs a self-test to check functionality and
test the connections of the configured equipment. Failures are
shown in red text on the screen. The failures of the diagnostics
tests are also stored in the error log located in the Info screen
(from main menu).
NOTE: For a list of errors, refer to appendix A of this user guide.
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019 51 of 158