Adding A Recorder Offset To The Test Channel - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.10.1.5. Adding a Recorder Offset to the Test Channel

158
Some analog signal recorders require that the zero signal is significantly different from
the baseline of the recorder in order to record slightly negative readings from noise
around the zero point. This can be achieved in the T700 by defining a zero offset, a
small voltage (e.g., 10% of span).
To add a zero offset to a specific analog output channel, press:
Teledyne API – Model T700 Dynamic Dilution Calibrator
06873B DCN6388