The Manual Gas Generation Step - Teledyne T700 Operation Manual

Teledyne API – Model T700 Dynamic Dilution Calibrator

4.3.2.9. The MANUAL Gas Generation Step

Note
06873B DCN6388
The MANUAL step causes the T700 calibrator to enter MANUAL CALIBRATION
MODE. It is programmed in a similar manner to the calibrator's GENERATE 
MANUAL function. AT the end of the programming sequence, the T700 firmware will
automatically insert a DURATION step that needs to be defined.
To insert a MANUAL step into a sequence, press:
If the user attempts to generate a source gas type that has not been entered into
the T700's gas library, the sequence will freeze and after a certain time-out
period, stop running.
Overview of Operating Modes and Basic Operation
139