The Duration Step; The Execseq Step - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.3.2.6. The DURATION Step

4.3.2.7. The EXECSEQ Step

136
The duration step causes the T700 to continue performing whatever action was called
for by the preceding step of the sequence.

If that step put the instrument into STANDBY mode, the calibrator stays in
STANDBY mode for the period specified by the DURATION step,

If that step put the instrument into GENERATE mode, the will continue to
GENERATE whatever calibration mixture was programmed into that step for the
period specified by the DURATION step.
To insert a DURATION step into a sequence, press:
The EXECSEQ step allows the sequence to call another, already programmed
sequence. This is a very powerful tool in that it allows the user to create a "toolbox" of
often-used operations that can then be mixed and matched by an overhead sequence.
Teledyne API – Model T700 Dynamic Dilution Calibrator
06873B DCN6388