Teledyne API – Model T700 Dynamic Dilution Calibrator
4.3.2.4. The PURGE Step
4.3.2.5. The STANDBY Step
06873B DCN6388
This step places the T700 into PURGE mode.
At the end of the programming sequence, the T700 firmware will automatically insert a
DURATION step that needs to be defined.
To insert a PURGE step into a sequence, press:
The STANDBY step places the T700 into STANDBY mode. It is recommended, but
not required to follow this with a DURATION step.
To insert a STANDBY step into a sequence, press:
Overview of Operating Modes and Basic Operation
135