Enabling And Disabling Gas Types - Teledyne T700 Operation Manual

Dynamic dilution calibrator

Hide thumbs Also See for T700:

Table of Contents

Getting Started

3.4.6.4. Enabling and Disabling Gas Types

By default, all of the gases listed in Section 3.4.5 and the four undefined USER gases

are ENABLED. Any of these can be disabled. Disabling a gas type means that it does

not appear in certain prompts during portions of the T700's operation (e.g. setting up

sequences) and is not figured into the calibrators calculating when determining

calibration mixtures.

To disable a gas type, press:

Teledyne API – Model T700 Dynamic Dilution Calibrator

06873B DCN6388