Advertisement
Front Panel
2
1
1 Power Button
2 USB Host Port
3 T FT Display
4 Numeric Keypad
5 Adjust Knob
6 Arrow Keys
1. Power Button
Used to turn on/off the waveform generator. When the power button is off, the
generator is under power off state.
2. USB Host Port
Used to read waveforms or status files from a USB drive or save current
instrument status to a USB drive. Firmware can be updated through the USB
port. The waveform generator supports a FAT formatted USB drive.
3. TFT Display
The waveform generator has a 4.3 inch TFT color LCD display, which can
display the current function menu, parameter settings, system state, and help.
4. Numeric Keypad
Consists of numbers from 0 to 9, radix points "." and symbol keys "+/-", which
are used to input parameters.
Note：To enter a negative number enter a "-" symbol before the numbers.
4
3
11
4
9
10
8
7 CH1/CH2 Control/Output Port
8 Channel Select Key
9 Function Keys
10 Waveform Selection Key
11 Menu Keys
5
6
7
Advertisement
