The NTC-6200 series are intelligent penta-band 3G and quad-band 2G
M2M Routers designed for Machine-to-Machine (M2M) applications taking
advantage of the high speed and wide coverage of modern cellular networks.
Featuring Ethernet, Serial (RS232/422/485), and USB 2.0 connectivity, the
NTC-6200 series can interface with a diverse range of equipment used in a
wide variety of vertical applications.
APPLICATION EXAMPLES
SPECIFICATIONS
PROCESSOR & STORAGE
•
Powerful 450Mhz ARM9 processor with 64MByte DDR2 Ram
•
256MByte Flash memory storage (~120MB available on board
space for user storage)
OPERATING SYSTEM
•
Embedded Linux 3.6
PEAK DATA SPEED
•
HSDPA/HSUPA data rates: DL: 7.2 / 14.4 Mbps, UL: 2.0 / 5.76
Mbps (Concurrent data rate: DL: 7.2 Mbps, UL: 5.76 Mbps)
•
UMTS data rates: DL: max. 384 kbps, UL: max. 384 kbps
•
EDGE class 12: DL: max. 237 kbps, UL: max. 237 kbps
•
GPRS class 12: DL: max. 85.6 kbps, UL: max. 85.6 kbps
•
CSD data transmission 14.4 kbps, V.110
CELLULAR BANDS
•
UMTS/HSDPA/HSUPA: 800/850/900/2100/1900 MHz
•
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
CONNECTIVITY
•
1x (RJ-45) 10/100Base-TX Port with Auto MDIX
•
1x RS232 Serial Port DB-9 female DCE supporting either 9 wire
RS232 or RS485/RS422 (software selectable).
•
Software controlled termination resistors for RS485
•
Mini USB 2.0 OTG interface with 0.5A supply capability
SIM CARD READER
•
Lockable Tray Reader with Push-Button-to-Release
•
Supports Mini USIM/SIM Format (2FF)
RESET BUTTON
•
Reset button (recessed, requiring pen/paperclip) with three
functions: Reboot, reboot into recovery mode, and reset unit to
factory defaults
ANTENNA CONNECTORS
•
2x SMA connectors for 2G/3G (1x Main and 1x RX Diversity)
LED INDICATORS
•
8x tri-colour LEDs. Power, Network and 5x Signal Strength
indicators
•
Easy and clear LED status display for connection status, connected
network type, and connection errors
CELLULAR
•
Profile managed packet data connections
•
NAT Disable for framed route configuration
•
Transparent bridge mode using PPPoE to allow the router to
NetCommWireless
NETCOMM WIRELESS LIMITED
Head Office - 18-20 Orion Road, Lane Cove,
NSW 2066, Sydney, Australia ABN 85 002 490 486
E: sales@netcommwireless.com
Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
3G M2M Router
Remote Location
Weather Station
CCTV
Vending machine
transparently forward Public WAN IP address to a downstream device
•
SIM Security Management (PIN configuration, enable and disable)
•
Automatic and manual cellular band selection
•
Automatic and manual operator selection
NETWORK &ROUTING
•
Static Routing, RIP (v1/v2), Port Forwarding and DMZ
•
Dynamic DNS
•
VRRP for redundant router failover
•
DHCP Server, including :
o
Address reservation by MAC address
o
Custom DNS server definitions
o
DHCP Relay
o
DHCP list display in Web-UI
o
Advanced DHCP Option configuration (Option 42 NTP, Option
66 TFTP, Option 150, Option 160)
VPN
•
PPTP Client for VPN connectivity to remote PPTP VPN Server
•
IPSec tunnel termination (for up to 5 tunnels)
•
GRE Tunnelling
•
OpenVPN (Client, Server and P2P)
ADMINISTRATION & CONFIGURATION
•
Web-based User Interface (HTTP/HTTPS) for full device status and
configuration
•
Password protected configuration file backup and restore for quick
device configuration and device cloning
•
Telnet Command Line Interface for status monitoring, configuration
and control
•
SNMP v1/v2 including cellular specific MIB, config and
firmware download
•
TR-069 Client for remote device configuration, configuration
backup and restore, and firmware upgrade
•
SMS Client (Send/Receive) including inbox, outbox
•
Ping monitor watchdog (Reset connection on repeated ping failure)
•
Diagnostic Log Viewer (remote and local)
•
System Status and Security Logs
•
NTP Server Support for network time sync of device's system clock
•
Device User Guide stored on the device and accessible via the
Web-based User Interface (HTTP/HTTPS)
•
Advanced Diagnostics and Control via SMS
o
Query status information – such as Signal Strength, WAN IP,
Uptime, and many more
o
Configure device remotely via SMS – such as APN,
authentication settings, and many more
o
Execute commands via SMS – such as reboot, reset to
defaults, go offline, and many more
NetCommWirel
The router's open Linux operating system and Software Development Kit
(SDK) offers the capability to install custom software applications within the
substantial onboard flash memory. The routers also allow full remote system
monitoring, remote diagnostics, remote configuration and firmware updates
over the air The 6200 series is designed with durability in mind. Its compact
rubberised case design has flexible mounting options and has been tried
and tested in extreme applications to ensure users can enjoy a reliable and
long product life-span.
Cellular Tower
o
Secure SMS management using sender whitelisting and
password management
o
SMS acknowledgement replies for queries and commands
FIRMWARE MANAGEMENT
•
Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/
HTTPS, SNMP, TR-069)
•
Multiple firmware image storage on device and dynamic install
•
Triggered firmware upgrade via SMS (initiate download & install
from HTTP/HTTPS)
SOFTWARE DEVELOPMENT KIT
•
Develop and install custom software applications
•
Open Linux standard development environment
•
Develop applications/scripting in standard ANSI C/Shell script
and LUA
•
Package manager built into Web-UI for Application installation/removal
•
API (C, LUA and Shell libraries) to the unit's internal Runtime
Database to allow full status monitoring configuration and control of
the device from custom applications
TEMPERATURE
•
Operating Temperature Range: -40°C ~ +70°C
•
Storage Temperature Range: -40°C ~ +95°C
POWER SUPPLY
•
Power input via 2 way termination block receptacle
•
Field terminable power input via screw type terminal block included
•
DC Power (8 - 40V DC)
•
Recommended power input rating of 6W via DC terminal block (e.g
12V 1.5A)
•
Vehicle compatible protection on DC Input Jack. (ISO7637 standard)
DIMENSIONS, WEIGHT & MOUNTING
•
Device dimensions (excluding external antenna): 143mm (L) x
107mm (W) x 34mm (D) / 221g (254g with bracket)
•
Wall mount support in multiple orientations via embedded
mounting holes
•
DIN Rail mount support via plastic bracket included in box
(Top hat section rail TH 35 IEC60715)
REGULATORY COMPLIANCE
•
FCC, PTCRB, CE, GCF, WEEE, RoHS, A-Tick, IC, e-mark
*Specifications subject to change without notice
www.netcommwireless.com
PRODUCT DATASHEET
Internet
Server