Table of Contents
Advertisement
Placement of the router
The two external high-performance antennas supplied with the router are designed to provide optimum signal strength in a wide
range of environments. If you find the signal strength is weak, try adjusting the orientation of the antennas. If you are unable to get
an acceptable signal, try moving the router to a different place or mounting it differently.
Note: When selecting a location for the router, allow at least 20 seconds for the signal strength LEDs to update before trying
a different location.
Mounting options
The NTC-6200 Series router can be quickly and easily mounted in a variety of locations.
Mounted flat against the wall
When mounted flat against the wall, the NTC-6200 Series router has a slimline form factor. Use appropriately sized screws in the
mounting holes provided on the base of the unit.
DIN rail mounting bracket
V Bend allows you to snap the DIN bracket onto the middle of a DIN rail rather than sliding it onto the end.
www.netcommwireless.com
Figure 6 - Wall mount - Flat against the wall
Figure 7 - NTC-6200 Series mounting bracket
NetComm Wireless 3G M2M Router / Plus
13
Advertisement
Table of Contents
