Setting The Warning Value For The Back Pressure (Option) - EBARA ESA500W Instruction Manual

6.3.7 Setting the WARNING value for the back pressure (option)

SET POINT
BACK PRESSURE?
△ ▽
: Increase the setting value by 0.5 kPa.
△
: Decrease the setting value by 0.5 kPa.
▽
Upper limit : 20.0 kPa
Lower limit : 5.0 kPa
Factory setting : 10.0 kPa
WARNING reset value : Set value –2.0 kPa
PM10U
PRG.
BACK PRESSURE
ENTER
Use the up and down arrow keys to change the setting value.
##.# kPa
Use the keys, " △ " and " ▽ " to set.
Setting
ENTER
done
EBARA
CORPORATION
P.35