EBARA ESA500W Instruction Manual page 25

P.12
WARNING
CAUTION
CAUTION
(1) To fix the pump, turn the adjusters to the right to lower them.
(2) Level the pump by adjusting adjusters. Check the levelness by a put level on
the inlet flange. If you cannot check the level, you should keep a difference of
height between the both sides of the pump base less than 1mm.
The adjustment allowance is approximately 15 mm.
[ NOTE ] If the pump is not leveled, shortage of the lubrication oil supply to the
bearing may be caused.
[ NOTE ] To prevent vibrations and airborne noises, keep horizontal level of
pump with the adjustment feet.
PM10U
Be careful not to overturn the pump when pushing and
pulling it sideways, because the width of the pump is small
to its height.
The neck portion of the casters will vibrate during caster
movement. Be sure to keep your fingers and feet out.
Do not step on the pump or place objects on it.
EBARA
CORPORATION