FujiFilm PROFECT CS Service Manual page 1363

3.
Place the RU in the Maintenance Mode.
After the main screen appears, sequentially touch the upper left and upper right
corners of the touch panel.
u NOTE u
Because the IP address of the FTP server has not been set yet, it takes about
three minutes until the main screen appears.
REFERENCE
If your touch is accepted by the panel, a "beep" alarm sound is generated.
u INSTRUCTION u
If you cannot put the RU into the Maintenance Mode, turn OFF the power of the
RU and then reboot the RU all over again.
011-202-08E
09.30.2009 FM5540
4.
Set the IP address of the RU.
u NOTE u
Enter the IP address of the RU that is set in the CL.
CR-IR 363 Service Manual
IN-30
IN-30