FujiFilm PROFECT CS Service Manual page 1347

11.
Secure the top plate removed at step 6 onto the carrier pallet.
CAUTIONS
- Use the insulock ties to fix the top plate onto the carrier pallet securely.
- Be sure to secure the top plate on the rear side of the machine. The carrier
pallet is designed so that the top plate cannot be secured on the front side of
the machine.
12.
Raise the adjustable feet up to their upper limit.
011-202-08E
09.30.2009 FM5540
13.
Remove the vinyl cover that protects the machine.
u INSTRUCTION u
During the winter season, allow the machine to stand under its cover-attached
condition for sufficient time before unpacking it.
If the vinyl cover is removed immediately after the machine is carried into the
room, moisture condensation may occur on the machine.
14.
Lower the machine from the carrier pallet.
CAUTION
When lowering the machine from the carrier pallet, one person should be
positioned on the right-hand side of the machine, and the other on its left-hand
side.
CR-IR 363 Service Manual
IN-14
IN-14