FujiFilm PROFECT CS Service Manual page 1344

3.
Remove the screws from the crate.
4.
Incline the crate to take it out.
CAUTION
When removing the crate, incline the crate to take it out. If you try to move the
crate, it might hit the machine, thereby damaging the machine.
011-202-08E
09.30.2009 FM5540
5.
Remove the top plate from the crate.
CAUTION
The top plate should not be disassembled, because it will be used when
lowering the machine from the carrier pallet.
REFERENCES
- After the top plate is removed, break up the crate and put the resulting pieces
together for conveyance.
- Because the crate is assembled with nails, hit it with a hammer or the like from
inside to break up the crate.
- Use care not to get injured by protruding nails when breaking up the crate.
CR-IR 363 Service Manual
IN-11
IN-11