Charging With Ac Adapter (Optional); Charging With Charging Cradle (Optional) - SATO PW208NX Operator's Manual

1.2.2 Charging with AC Adapter (Optional)

1
Connect the AC adapter (Optional).
Open the interface cover.
Connect the DC plug to the printer and the AC
power plug to the AC outlet.
* The shape of power plug varies depending on
the region.
2
Charging starts.
During charging, do not power off the printer.
For details on the display during charging, see
"Icon" ( page 23).


1.2.3 Charging with Charging Cradle (Optional)

There are two types of charging cradles: 1Bay Charging Cradle for charging one printer, and 4Bay Charging
Cradle for charging four printers simultaneously
This section describes how to use the 1Bay charging cradle to charge the printer.
1
Remove the black protective seal labeled "CRADLE
ACCESS" affixed to the bottom of the printer.
AC power plug
AC adapter
( page 140).

Protective seal
Mobile printer PW208NX/PW208mNX
Before You Start
DC plug
Interface cover
15