Section 3 Configuration; Configuration Of The Accqprep - Teledyne ACCQPrep HP125 Installation And Operation Manual

ACCQPrep HP125

Section 3 Configuration

3.1 Configuration of the
ACCQPrep
Instrument Configuration
Figure 3-1 Instrument configuration screen
Instrument Configuration can be found under:
T > C
OOLS ONFIGURATION
From this menu you can select the solvents for both solvent A
and B (Figure 3-1). This screen will appear when the Solvent
Selector Valve Module is present. If it is absent the solvents are
selected on the M R
AIN
shown in the C
ONFIGURATION
will still show the A
DD
to edit the list.
If you do not see your solvent name on the list, click on A
S and type in the solvent name. There is also an option to
OLVENT
remove solvent names you no longer use.
Solvent Level Sensing –
• E S
NABLE OLVENT
level in each of the supply containers.
• E W L
NABLE ASTE
the waste level reaches approximately one inch above
the sensing line.
> I C
NSTRUMENT ONFIGURATION
screen and the drop downs are not
UN
screen. The C
ONFIGURATION
S and R
OLVENT EMOVE
L S monitors the solvent
EVEL ENSING
S stops the system when
EVEL ENSING
screen
S buttons
OLVENT
DD
3-1