Teledyne ACCQPrep HP125 Installation And Operation Manual page 29

Figure 2-20 AutoSampler Module peristaltic pump with tubing correctly attached
Figure 2-21 Wash and waste tubing connections and labels
Note
The wash fluid peristaltic pump uses Pharm-A-Line tubing.
Please ensure the wash fluid is compatible with this tubing,
such as methanol.
9. Connect the tube labeled "Wash Waste" to the tube labeled
"4" connected to port "4" of the peristaltic pump on the
back of the Autosampler Module. The free end of the tub-
ing can be placed in the waste container or tee'd into an
existing waste line (Figure 2-21).
ACCQPrep HP125
Section 2 Installation
2-13