Table of Contents
Advertisement
view this information. On PurIon equipped systems, the
mass spectrum of the fraction contents can be displayed
by pushing the MS button and clicking on a tube."
• Method parameters — Click the D
button to view a summary of the peak detection and
collection settings for the run.
• Chromatogram — The right side of the window displays
the chromatogram, identified by the Sample Name in
the title bar of the window.
• O
buttons — The O
PTION
access to frequently used commands while viewing a
run. The buttons are:
· P
— Click this button to print a run summary.
RINT
When viewing the run from a remote personal
computer, the summary can be printed on any
installed printer. If you are attempting to print from
the systems touch panel display, you must first set up
NETWORK PRINTING in the NETWORK C
settings.
RATION
· Save As PDF — Click this button to save the run
summary in PDF file format. When viewing the run
from a remote personal computer, the summary can
be saved to any connected storage device. If you are
attempting to save a PDF file from the touch panel
display, insert a USB Flash drive in the USB port
below the display panel.
· S
A
TXT — Click this button to save the run
AVE
S
summary in an ASCII text file format. When viewing
the run from a remote personal computer, the
summary can be saved to any connected storage
device. If you are attempting to save a TXT file from
the touch panel display, insert a USB Flash drive in
the USB port below the display panel.
• Use pinch zoom or pan to view the results screen in
greater detail. Pan requires the use of 2 fingers to differ-
entiate a pan action from a select action
• Format Graph— Click this button to open a window
from which you can set the left and right Y-axis scales.
These scales are controlled by the Absorbance and %B
upper limits. Clicking the S
button shows the threshold level setting of all detectors
except the mass spectrometer. The threshold levels are
color-coded to the detector trace.
• MS - Click this button to display a mass spectrum
(PurIon systems only). Clicking in the Chromatogram
window displays a mass spectrum at that point during
the run. Clicking on a tube in the rack map shows the
mass spectrum of the contents of that fraction.
• UV (will be displayed as vis on UV-Vis equipped
systems) - Click this button to display a UV or
ACCQPrep HP125
Section 5 PeakTrak
M
ISPLAY
ETHOD
buttons give you quick
PTION
ONFIGU
T
L
HOW
HRESHOLD
EVEL
-
5-33
Advertisement
Table of Contents
Troubleshooting
