Teledyne ACCQPrep HP125 Installation And Operation Manual page 116

ACCQPrep HP125
Section 6 Maintenance
Figure 6-20 Pump assembly
Figure 6-21 Pump assembly
Figure 6-22 Location of fittings
6-16
Inlet lines
Outlet lines
7. Pull the pump assembly forward to the position shown in
Figure 6-21.
8. With the pump assembly pulled out, remove the inlet fit-
tings connected to the bottom of the pump head. Using a
1
/ " wrench, remove the stainless steel outlet lines on the
4
top of the pump head (Figure 6-22).
Outlet lines removed
Pump drive
connector
Inlet lines removed