Teledyne ACCQPrep HP125 Installation And Operation Manual page 67

5.2.1 File The File menu lists the following commands:
New – Select the N
EW
PeakTrak will open the M
settings for the default configured column size.
Open – Choose this command to open a M
a R F (.run) stored on the system's internal hard drive.
UN ILE
Manage Files – Choose this command to open a window from
which you can archive or delete method and run files from the
current directory. You can archive files by connecting a USB
Flash drive and selecting the Copy or Move files to flash drive
option.
• To remove a file from the internal hard drive, highlight
the file or enter the filename and click the D
button.
• To remove multiple files, you can drag to highlight
multiple files, or click the D
specify the age limit in months and click OK.
Note
Use the M and D
OVE
cannot be recovered from the internal hard drive once the
action is complete.
Set Data Path – This opens the S
this window to specify the default storage folders for users. These
folders contain multiple M
created by system users.
Save Method – Choose this menu command to save the settings
of the current method file to the system's internal storage if the
file is already named. If not already named, you will be prompted
to give the method a name and it will be saved.
Note
D M are an exception and cannot be overwritten
EFAULT ETHODS
by the S M
AVE ETHOD
and you attempt to save any modifications to that method, the
F window appears so you can rename the method file. This
ILES
preserves the default method. The D
edited in the Prep HPLC tab.
Save Method As – From this window you can rename the
current method and save it on the system's internal hard
drive.
Save Run As PDF – Choose this command to save the
displayed run on a remote computer's hard drive or a USB
Flash storage device connected to the system. When
selecting this menu command from the touch screen, the
system saves the file on the USB storage device. The default
file name will be the same as the R
"PDF" file name extension. PeakTrak displays a file
Section 5 PeakTrak
command to open a new method file.
window using the default program
AIN
ETHOD
A
ELETE BY GE
options with caution as the files
ELETE
D P
ET ATA
and R
ETHOD FILE
command. If a D
EFAULT
M
EFAULT
file, except with a
UN
ACCQPrep HP125
F (.pmtd) or
ILE
ELETE
button. Then
window. Use
ATH
F resources
UN ILE
M is open
ETHOD
must be
ETHOD
5-3