Set Administrator Password - Teledyne ACCQPrep HP125 Installation And Operation Manual

5.2.16 Set Administrator
Password
• The "Static IP" option will require an IP address,
Netmask, and Gateway provided by you network admin-
istrator. The IP address, Netmask, and Gateway will be
automatically retrieved from the DHCP server when
selecting the DHCP option.
IP Address – •Enter the static IP Address for the system.
Static IP option only.
Netmask – •Enter the Netmask for the system. Static IP
option only.
Gateway – •Enter the Gateway for the system. Static IP
option only.
Network Printing – •The system can print to a network
printer and supports JetDirect and line printer (LPR)
queues.
Consult with your network administrator to determine:
• The IP address of selected printer.
• If the printer uses an LPR print queue, you must also
find out the queue name.
• If the printer uses a JetDirect print queue, also ask for
the port number.
• The printer type: either Postscript or PCL.
• When this information is known, you can proceed with
configuring system for network printing.
Follow the on-screen instructions for entering the address,
queue, and printer type information. After successfully printing
a test page, the network printer will be available for printing
using the F > P
ILE RINT
P A E O R
RINT T ND F UN
Network File Save Configuration – When configured, this
feature allows the system to access a network directory from
which it can save run files as PDF, text, or run monitor. To enable
this feature, select a file type to be saved and enter the
remaining settings necessary for network access. Your network
administrator will be able to provide the required settings.
Note
All server and domain names must be fully qualified. That is
e n t r i e s m u s t i n c l u d e
name.domain.domain...). Use forward slashes (/), not back
slashes, when entering the network share path.
This window, opened by selecting the T
P menu command, is used to enter and change
TRATOR ASSWORD
the system password.
To enter or change a password:
1. Type the password. The factory default password is
"accqprep".
2. Type the new password.
3. Type the password again to verify your entry..
Section 5 PeakTrak
menu command and the A
feature.
t h e f u l l n a m e
OOLS
ACCQPrep HP125
UTOMATICALLY
( s e r v e r
> S A -
ET DMINIS
5-25