Teledyne ACCQPrep HP125 Installation And Operation Manual page 15

Electrical Safety per EN 61010-1
Pollution Degree
Installation Category
Maximum Altitude
Note 1. All specifications are subject to change.
Table 1-2 ACCQPrep HP125 with PurIon System
Dimensions (H x W x D)
ELSD Detection
Mass Spectrometry Detection
Note 1. All specifications are subject to change.
Chromatographic Tubing
Drain Tubing
Chromatographic Valves
Flowcell
Chromatography Pump
Pressure Transducer
AutoSampler Wash
Table 1-1 ACCQPrep HP125
2
II
2000 meters
ACCQPrep: 27.5 x 14.0 x 20.0 in (69.9 x 35.6 x 50.8 cm)
Mass Spectrometer 26 x 11 x 22 in (66 x 28 x 56 cm)
Roughing Pump 10 x 9 x 18 in (26 x 23 x 46 cm)
Option that can be combined with either UV or UV-Vis
10 – 1200 Dalton for S model, 10-2000 for L model,
1 Dalton Resolution
Electrospray Ionization (ESI) or optional Atmospheric Pressure
Chemical Ionization (APCI)
Simultaneous positive and negative ionization for both S and L
models.
Table 1-3 Component Materials List
316 stainless steel tubing, PEEK, and
Fluoropolymer
Vinyl with FEP liner
PEEK, PPS, perfluorelastomer (FFKM)
303 SST, Type ES Quartz, SIMRIZ
316 Stainless Steel, UHMWPE, ETFE, ruby, sapphire, and zirconia
316 and 17-4 PH stainless steels and perfluorelastomer (FFKM)
Pharm-A-Line, polypropylene
ACCQPrep HP125
Section 1 Introduction
® ®
SZ485
1-5