Teledyne ACCQPrep HP125 Installation And Operation Manual page 19

Figure 2-3 Pump compartment with electrical connection
shown
Figure 2-4 Black connection with tab facing up
Figure 2-5 White connection with tab facing up
4. When the pump assembly is most of the way in the pump
compartment, connect the electrical connections on each
side of the pump. First, connect the black connection on the
left side. Ensure the tab on top of the connector is facing up
before pushing it into the mating connector (Figure 2-4).
Then, connect the white connection on the right side. Ensure the
tab on top of the connector is facing up before pushing it into the
mating connector (Figure 2-5).
ACCQPrep HP125
Section 2 Installation
2-3