During Front Panel Operation - Sony PZW-4000 Service Manual

2-3-3. During Front Panel Operation

Log Alarm message in
status display area
—
KEY INHI.!
—
Not Open Clip!
—
Clip Top!
—
Clip End!
—
MAX # Clips
—
Media Full!
—
REGEN mode!
—
REC mode!
—
STOP ONCE!
—
REMOTE!
—
Media Top!
—
Media End!
—
Illegal Operation!
—
Media is not Ready.
—
No EM Space
—
EM Full!
Alarm message in video monitor screen Description/action
Displayed when the KEY INHI switch is "ON".
Set the KEY INHI switch to "OFF".
Displayed when a clip operation is attempted with
no clip selected.
Select a clip on the clip list screen and try the
operation again.
Displayed during playback if you execute a reverse
search when the unit is stopped at the first frame of
a clip.
To move to another clip, press the PREV, NEXT,
SHIFT + PREV, or SHIFT + NEXT button, or
perform a thumbnail search.
Displayed during playback if you execute a
forward search when the unit is stopped at the last
frame of a clip.
To move to another clip, press the PREV, NEXT,
SHIFT + PREV, or SHIFT + NEXT button, or
perform a thumbnail search.
No more clips can be recorded because the
maximum number of recorded clips has been
reached.
Delete any unwanted clips.
Recording or copying is not possible because the
internal storage is full.
Delete any unwanted clips.
Displayed when PRST/RGN on the P3 TC page of
the function menu is set to "TC" or "VITC", and
you try to preset timecode or user bits.
Set PRST/RGN to "PRESET".
Stop recording and try again.
Displayed when an attempt is made to change
media during recording or playback.
Stop the recording or playback and try the
operation again.
Press the REMOTE button, turning it off, to put the
unit into local control mode.
Displayed when an attempt is made to execute a
reverse search when the unit is stopped at the first
frame of the first clip during media playback.
Displayed when an attempt is made to execute a
forward search when the unit is stopped at the last
frame of the last clip during media playback.
Displayed when an attempt is made to carry out an
invalid operation.
The media is in the course of being mounted or has
not been loaded.
An essence mark could not be recorded because
there is no space before and after the desired
position.
Delete unneeded shot marks 0 to 9 on the chapter
thumbnail screen.
No more essence marks can be recorded.
Delete unneeded shot marks 0 to 9 on the chapter
thumbnail screen.
27