Markers All Off; Measure Corr All - HP 8360 B Series User Manual

Function Group
Menu Map
Description
Programming Codes
See Also
Function Group
Menu Map
Description
Programming Codes
See Also
MARKER
3
This softkey lets you turn all the markers off. The frequency value
given to the markers remains in memory and will be recalled when
the marker softkeys are pressed again. Softkeys Amp1 Markers ,
markers off. The function (or the frequency values) is retained as the
swept signal generator settings.
SCPI: MARKer:AOFF
Analyzer: SHMO
"Marker Operation" in Chapter 1
"Programming Typical Measurements" in Chapter 1
POWER
5
This softkey enables the swept signal generator to act as a controller
to command an HP 437B power meter to measure flatness correction
values at all frequency points defined in the flatness array.
SCPI: NONE
Analyzer: NONE
Fltness Menu, Mtr Meas
"Creating and Applying the User Flatness Correction Array" in
Chapter 1
Ml--M2 Sweep are not affected by turning the
Ml--M2 Sweep,@%?'ii?)
Menu
Operating and Programming Reference M-7
All
Measure Corr