Arrow Keys - HP 8360 B Series User Manual

Arrow Keys

Function Group
Menu Map
Description
Programming Codes
See Also
A-22 Operating and Programming Reference
ENTRY
NONE
keys lets you manipulate numerical values in the
This group of entry
active entry line.
keys identify (by underlining) the digit to be
. -
changed. For example, if CW frequency is in the active entry line,
and the display indicates:
10005.000000 MHz
You may wish to change the 5 to a 6. Press the a five times until
the underline is under the 5. Now use the rotary knob or the a
to change the 5 to a 6. The underlined digit remains the active
character in this function until the swept signal generator is preset,
turned off, or the underline is moved completely left or right.
The @) and @j arrow keys increment or decrement the numeric
value by a predetermined amount. The increment value depends on
the active function and the step value set. All increment values are
defaulted to their original values when the swept signal generator
is preset (unless Preset Mode User
differently).
SCPI:
NONE
Analyzer:
NONE
"Entry Area" in Chapter 1
"Creating and Applying the User Flatness Correction Array" in
Chapter 1
has defined the default