HP 8360 B Series User Manual page 57

Figure l-15. MM-wave Source Module Leveling Using a Microwave Amplifier
1. Set up the equipment as shown.
2. Refer to menu map 1.
3. Select Leveling Point Hodule .
All of the ALC data necessary to communicate properly with the
swept signal generator is exchanged via the SOURCE MODULE
INTERFACE.
Hint
To obtain flatness corrected power, refer to "Creating and Applying
the User Flatness Correction Array" in the "Optimizing Swept Signal
Generator Performance" section.
AHPLIFIER
where the interface connection is made.
Getting Started Advanced l-29