Power Sweep - HP 8360 B Series User Manual

Function Group
Menu Map
Description
Programming Codes
See Also
P-8 Operating and Programming Reference
P O W E R
5
This softkey enables the power sweep function. RF output power
can be swept both positively and negatively over a selected range.
The level of the power sweep starting point is the power level
programmed. Power sweep widths can be 45 dB wide in either
direction. However, the settable power sweep range is dependent on
the ALC level set. An asterisk next to the key label indicates that
this feature is active.
POWer:MODE SWEeplFIXed
POWer:STARt <num>[level suffix]IMAXimumIMINimum
POWer:SPAN <num>[level suffix](MAXimum(MINimum
Analyzer:
function on,
Power Slope
"Power Sweep and Power Slope Operation" in Chapter 1
PSO function off.