HP 8360 B Series User Manual page 376

Function Group
Menu Map 2
Description
Programming Codes
See Also
FREQUENCY
This softkey reveals the stepped frequency sweep entry menu.
Dwell Coupled
Step Control Master
Step Control Slave
Step Dwell
S t e p P o i n t s
Step Size
Step Sup Pt Trig Auto
Step Sup Pt Trig Bus
Step Sup Pt Trig Ext
SCPI:
NONE
Analyzer:
NONE
Sweep Mode Step
"Using Step Sweep" in Chapter 1
Couples the dwell time for stepped
sweep points to ramp sweep, sweep
time.
Causes the swept signal generator
to act as the master control in
a dual swept signal generator
measurement setup.
Causes the swept signal generator
to act as the slave in a dual swept
signal generator measurement
setup.
Sets the dwell time for points in
stepped sweep.
Sets the number of points in a
stepped sweep.
Sets the increment value for the
points in a stepped sweep.
Automatically steps the swept
signal generator to the next point in
a stepped sweep.
Steps the swept signal generator to
the next point in a stepped sweep
when an HP-IB trigger is received.
Steps the swept signal generator to
the next point in a stepped sweep
when an external hardware trigger
is received.
, [
S W E E P T I M E
Operating and Programming Reference S-69
Step
Sup Menu
)