HP 8360 B Series User Manual page 256

(MARKER]
Function Group
Menu Map 3
Description
See Also
MENU SELECT
This hardkey allows access to the marker functions.
frequency to the value of the most recently
Delta Marker
Delta Mkr Ref
reference menu.
MI--M2 Sweep
Marker MI
Marker M2
Marker M3
Marker M4
Marker
Turns off all markers.
Markers All Off
Changes the swept signal generator start and
stop frequencies to the values of Ml and M2.
The markers are functional whenever an asterisk appears next to the
key label, but only one marker can be active at a time. The active
marker is indicated in the active entry area.
"Marker Operation" in Chapter 1
"Programming Typical Measurements" in Chapter 1
Causes the swept signal generator to display
markers as an amplitude pulse.
Changes the swept signal generator's center
activated marker.
Display the frequency difference between the
active marker and the marker designated by the
Mkr Ref .
Reveals the softkeys in the delta marker
Causes the swept signal generator to sweep from
Ml to M2.
Makes Ml frequency the active function.
Makes M2 frequency the active function.
Makes M3 frequency the active function.
Makes M4 frequency the active function.
Makes M5 frequency the active function.
Operating and Programming Reference M-3