HP 8360 B Series User Manual page 228

Function Group
Menu Map
Description
Programming Codes
See Also
F-20 Operating and Programming Reference
USER CAL
9
This softkey initiates a full swept signal generator user calibration.
The calibration performed is instrument state dependent. For
example, if the swept signal generator is in ramp sweep mode, a
sweep span calibration and an auto track is done. If the swept signal
generator has amplitude modulation active on a CW signal, then RF
peaking and an AM bandwidth calibration is performed.
See the individual types of calibration.
Analyzer: NONE
AM BW Cal Always, AM BW Cal Once, Auto Track,
Peak RF Always, Peak RF Once, Swp Span Cal Always,
Swp Span Cal Once