HP 8360 B Series User Manual page 374

Programming Codes
See Also
Function Group
Menu Map
Description
Programming Codes
See Also
is active it calibrates the frequency at the end of every frequency
band.
SWEep:CONTrol:STATe ON]OFF]l]O
SWEep:CONTrol:TYPE SLAVe
Analyzer: NONE
Step Control Master, Step Sap Menu
FREQUENCY
2
This softkey lets you set dwell times for points in the stepped
frequency mode of sweep operation. The dwell time for points in step
frequency sweep may range from 100 ps to 3.2 s. The actual time
between points is the sum of dwell and phase lock times.
Select Step Dwell
value.
SWEep[:FREQ uency]:DWELl <num>[time suffix] or
SCPI:
Analyzer: NONE
Step Sup Menu, Sweep Mode Step
, then use the entry area to enter the desired
Operating and Programming Reference S-67
Step Dwell