Markers - HP 80000 User Manual

Data Gen 1GHz:Waveforms
m
Press the falling-edge key to set a low-level at the
n-cursor. Not,e that the waveform display reflects the
Data format and polarity settings. u you. HOW
Figure 3-25. Marker lock buttons
Press the Marker buttons next to a Channel name
button to lock a marker t,o that channel. The x-marker
is displayed in red, the o-marker is displayed in green
(unless the display colors have been modified). A marker
can only be locked to only one channel at a time. You
can use t.he CDelay) but.t on t.o aaust the channel delay for
channel to which the x-marker is locked. (See "&G$').
1. Press the corresponding red or green numeric
depending on which marker you want to act,ivat.e.
2. Use the knob, or drag the mouse with the righthand
key pressed, to move the marker, or press the numeric
button again to jump to a part,icular time in the
sequence.
"Markers Ix] @'), the marker can only move in steps of
one bit-period on that channel.
1 GHz Date Generator Operating Reference
cursor