Fm On/Off Dc - HP 8360 B Series User Manual

Function Group
Menu Map 4
Description
Programming Codes
See Also
Function Group
Menu Map 4
Description
MODULATION
This softkey lets you select AC coupled frequency modulation
(FM), and makes FM deviation frequency the active function.
FM sensitivity is selectable. Use the rotary knob, up/down, or
numeric entry keys to choose, 100 kHz, 1.00 MHz/V or 10.0 MHz/V.
Frequency deviation is dependent on the magnitude of the input
signal. An asterisk next to the key label indicates that this feature is
active.
FM:SENSitivity <num>[freq/V suffix]]MAXimum]MINimum
FM:COUPling AC
FM:STATe ON]OFF]l]O
Analyzer:
FM1 function on, followed by either 100 kHz, lMHz, or 10 MHz
MODULATION
This softkey lets you select DC coupled frequency modulation
(FM) and makes FM deviation frequency the active function.
FM sensitivity is selectable. Use the rotary knob, up/down, or
numeric entry keys to choose, 100 kHz, 1.00 MHz/V or 10.0 MHz/V.
Frequency deviation is dependent on the magnitude of the input
signal. When DC FM is chosen the swept signal generator displays
DC FM on the message line. An asterisk next to the key label indicates
that this feature is active.
Operating and Programming Reference F-13

FM On/Off DC