Entercorr - HP 8360 B Series User Manual

Function Group
Menu Map 5
Description
Programming Codes
See Also
E-2 Operating and Programming Reference
P O W E R
This softkey lets you enter a power correction value for a frequency
point in the flatness array. A frequency point must be entered before
a correction value can be accepted, otherwise the following error
message appears:
ERROR - Must first enter correction freq.
The up/down arrow keys let you scroll through the frequency points
available for power correction. If no correction value is entered
for a frequency point, the swept signal generator display indicates
Undefined. The range of acceptable values is -40 to +40 dB. An
asterisk next to the key label indicates that this feature is active.
SCPI: NONE, see Fltness Menu
Analyzer: NONE
Fltness Menu
"Optimizing Swept Signal Generator Performance" in Chapter 1