Power Slope Operation - HP 8360 B Series User Manual

Power Slope Operation

Power Sweep
1. Press POWER INIENU).
2.
Select Power Sweep.
3. Enter a value.
4. Press terminator key.
Select
Power
Press @YEi?).
The swept signal generator performs a power sweep beginning at
-20 dBm and ending at +5 dBm. The power meter indicates
This function allows for compensation of high frequency system or
cable losses by linearly increasing the power output as the frequency
increases. For this example, refer to the "Menu Map" section.
Press Power Slope, the active entry area displays:
Power slope is now active, notice that an asterisk is next to the key
label.
Use the entry keys, rotary knob, or arrow keys to enter a value for
the linear slope.
Press Power Slope again to turn this feature off.
SUEPT SIGNAL
RF OUTPUT
Figure l-10. Power Sweep and Power Slope Operation
Sweep (asterisk on).
where X is a numeric value.
X. XX dB/GHz,
POUER SENSOR
Power Slope
1. Press POWER IFV1ENU_).
2.
Select Power Slope.
3. Enter a value.
4. Press terminator key.
POWER tlETER
Getting Started Basic 1-19