HP 8360 B Series User Manual page 181

Function Group
Menu Map 8
Description
Programming Codes
See Also
SYSTEM
This softkey causes the swept signal generator to return to the
factory preset instrument state, after writing alternating ones and
zeroes over all state information, frequency lists, and save/recall
registers. You can select the number of times to clear memory. When
you select Clear Memory, the swept signal generator displays the
following in the active entry area:
Enter the number of times the state information should be
overwritten. While the swept signal generator is working to overwrite
the state information, it flashes the count on the display.
This softkey causes the swept signal generator to recall the original
calibration data stored in permanent memory (EEROM) all list and
user ALC correction data will be lost.
SYSTem:SECurity:COUNt <n>
SYSTem:SECurity[:STATe] ON
SYSTem:SECurity[:STATe] OFF
The transition from on to off triggers the blanking. Sending the "off'
message by itself will do nothing.
Analyzer:
SHKZOHZ
M e n u
S e c u r i t y
"Using the Security Features" in Chapter 1
Operating and Programming Reference C-3
Clear Memory