Up/Down Power; Up/Dn Size Cw - HP 8360 B Series User Manual

Function Group
Menu Map 5
Description
Programming Codes
See Also
Function Group
Menu Map 2
Description
U-2 Operating and Programming Reference
POWER
This softkey activates the power step size function. It can be set
from 0.01 to 20 dB. In this mode, power is stepped by the up/down
arrow keys. An asterisk next to the key label indicates this feature is
active.
POWer:STEP[:INCrement] <num>[DB] or
POWer:STEP:AUTO ON]OFF]l]O
Analyzer:
SP or SHPL and UP or DOWN
"Programming Typical Measurements" in Chapter 1
FREQUENCY
This softkey lets you set the frequency step size for the CW
frequency mode. The step size may be set from 1 Hz to
10 GHz. The factory preset size is 100 MHz. CW frequency is
incremented/decremented by pressing the up/down arrow keys.
If an underline cursor appears under a digit in the entry display, then
the value will be modified by the up/down arrow keys or the rotary
knob. The increment/decrement size in this case is the underlined
digit by the power of 10.
If the up/down function is on (asterisk next to key label) and the
cursor is not under one of the active entry area digits, then frequency
value is changed by the up/d own size using either the up/down arrow
keys or the rotary knob.