HP 8360 B Series User Manual page 227

Function Group
Menu Map 2
Description
Programming Codes
See Also
FREQUENCY
This softkey lets you set a frequency offset value and applies it to
all frequency parameters. The frequency offset ranges between and
including fllO.O GHz. Changing the frequency offset value changes
the display but does not affect the output frequency. Frequency
multiplier and offset are related as shown by the following equation:
Entered value or Displayed Frequency = (Frequency Generated
The factory preset value is 0 Hz. An asterisk next to the key label
indicates that this feature is active.
FREQuency:OFFSet <num>]MAXimum]MINimum
FREQuency:OFFSet:STATe ON]OFF]l]O
Analyzer:
SHFB <n>[Hz]Kz]Mz]Gz]]
FREQUENCY (MENU), Freq Mult
Operating and Programming Reference F-19
Freq Offset
Multiplier) + Offset value
x