HP 8360 B Series User Manual page 205

Function Group
Menu Map
Description
Programming Codes
See Also
POWER
This softkey lets you enter a frequency point into the flatness
correction array. When the Power Fltness Menu is selected,
Enter Freq is automatically activated. Frequency points must be
entered before correction values can be accepted into the array.
Frequency points can be entered in any order, and the swept signal
generator automatically reorders them beginning with the lowest
frequency. One frequency-correction pair is the minimum and 801 is
the maximum number of points that can be entered. An asterisk
next to the key label indicates that this feature is active.
SCPI:
NONE, see Fltness Menu
Analyzer:NONE
Fltness Menu
Operating and Programming Reference E-3
Enter Freq