HP 8360 B Series User Manual page 161

ALC BW Menu
See Also LALC)
Function Group
Menu Map
Description
Programming Codes
See Also
A-12 Operating and Programming Reference
ALC Bandwidth Select Low
"Optimizing Swept Signal Generator Performance" in Chapter 1
SYSTEM
8
This softkey causes the swept signal generator to alternate on
successive sweeps between the present instrument state and a second
instrument state stored in an internal register (1 to 8). Select
Altmate Regs once to turn it on, a second time to turn it off.
asterisk next to the key label indicates that this feature is active.
SYSTem:ALTernate:STATe ONlOFFlllO
SYSTem:ALTernate <num>IMAXimum(MINimum
Analyzer:
"Saving and Recalling an Instrument State" in Chapter 1
Sets the ALC bandwidth to the low
bandwidth position (10 kHz), and
to remain there for all sweep and
modulation conditions.
An