HP 8360 B Series User Manual page 365

Security Menu
Function Group
Menu Map 8
Description
See Also
S-58 Operating and Programming Reference
SYSTEM
This softkey accesses the security function softkeys.
Turns off the swept signal generator's data display,
Blank Display
active entry, and message line areas.
Writes alternating ones and zeros over all swept
Clear Memory
signal generator state functions and save/recall
registers a selectable number of times, then returns
the swept signal generator to the factory-preset
state of operation.
Disables the save function.
Save Lock
Displays zeros for all accessible frequency
Zero Freq
information.
The features listed above together with the softkeys Freq
and Freq provide the swept signal generator with security
controls for a variety of situations. The local lockout (LLO)
programming command adds security when the swept signal
generator is used in an ATE environment. A security calibration
constant that can be accessed through the service adjustment
menu (requires a password for access) is available also. Refer to
HP 8360 B-Series Swept Signal Generator/HP 8360 L-Series
the
Swept CW Generator Service Guide
constants.
"Using the Security Features" in Chapter 1
Offset
for information on calibration