Fmmenu - HP 8360 B Series User Manual

FM Coupling DC
Programming Codes
See Also
Function Group (MOD_)
Menu Map 4
Description
Programming Codes
F-12 Operating and Programming Reference
SCPI:
FM:FILTer:HPASs <num>[freq suffix]]MAXimum]MINimum
Analyzer:
NONE
(MOD), also see "FM" and "Modulation".
This softkey (Option 002 only) accesses the frequency modulation
softkeys. These softkeys engage external and internal frequency
modulation. They allow you to define the coupling, waveform, rate,
and deviation of the internal FM.
EM On/Off Ext
FM On/Off Int
Internal FM Rate
Internal FM Deviation
FM Coupling IOOkHz
FM Coupling DC
Waveform Menu
SCPI:
NONE, see the individual softkeys listed.
Analyzer:
NONE
(MOD), also see "FM" and "Modulation".
Toggles on and off the frequency
modulation mode for an external FM
source.
Toggles on and off the frequency
modulation mode using the internal
FM generator.
Sets the rate of the internal frequency
modulation.
Sets the deviation of the internal
frequency modulation.
Sets AC coupling for modulation rates
of 100 kHz or greater. The RF signal
is phase locked.
Sets DC coupling for modulation
rates of less than 100 kHz. The phase
locked loop is open.
Displays the waveforms for internal
frequency modulation.