Pulse Rise Timeauto; Pulse Rise Timefast - HP 8360 B Series User Manual

Function Group
Menu Map 4
Description
Programming Codes
See Also
Function Group
Menu Map 4
Description
Programming Codes
See Also
P-22 Operating and Programming Reference
MODULATION
This softkey lets you set the pulse rise time to depend on the state
of the swept signal generator pulse scalar function. If pulse scalar is
on, rise time is set to slow. Conversely if pulse scalar is off, then the
rise time is set to fast. The factory default is pulse rise time set to
auto. An asterisk next to the key label indicates that this function is
active.
SCPI:
PULM:SLEW:AUTO ON]OFF]l]O
Analyzer:
NONE
Pulse Menu
MODULATION
This softkey lets you set the pulse rise time to 250 ns regardless of
any other conditions. An asterisk next to the key label indicates that
this function is active.
SCPI:
PULM:SLEW <num>[time suffix]]MINimum
Analyzer:
NONE
Pulse Menu