HP 8360 B Series User Manual page 435

Equipment Supplied
Options Available
3-2 Installation
All HP 8360 B-Series swept signal generators are sent from the
factory with the following basic accessories:
Power cord
n
Software package
n
A set of manuals
n
The following adapters are also shipped with the swept signal
generators:
Adapter Descriptions and Part Numbers Shipped with
Each Swept Signal Generator Model
H P 8362OB/HP 83622B/HP 83623B/HP 83624B/HP 8 3 6 3 0 B
Type-N (F) to 3.5 nun (F)
3.5 mm (F) to 3.5 nun (F)
H P 83640B/HP 8 3 6 5 0 B
2.4 mm (F) to K (F)
2.4 mm (F) to 2.4 mm (F)
There are several options available on the HP 8360 B-Series swept
signal generators. For descriptive information on all of the options
available, refer to Chapter 25 "Specifications". For installation
information on the rack mounting kits, refer to later paragraphs in
this chapter. For information on retrofitting options, refer to the
"Option Retrofits" chapter in the
Generator/HP 8360 L-Series Swept CW Generator Service Guide.
Table 3-1.
HP 8360 B-Series Swept Signal
1250-1745
5061.5311
1250-2187