Installation Procedure; Removing Tapes And Retainers - Ricoh D131 Service Manual

Main Machine

2.2.2 INSTALLATION PROCEDURE

Removing Tapes and Retainers


To avoid serious injury, do not connect the power plug to the machine until you are
instructed to do so.
1. Unpack the machine and remove all the wrapping.
2. Remove all filament tape from the front of the machine.
3. Open the lower trays [A] and remove the operating instructions holder, red tabs, and wires
( x2)..
4. Open the ADF [B] and remove all shipping material.
5. Remove the tape from the back of the machine.

Save the filament tape and shipping retainers to prepare the machine for shipping in
the future.
D131/D132/D133 2-8 SM