Chapter 5
General Settings
5.7
RAID Configuration Settings
The volume information after the volume is created is as shown below.
Figure 5.12 Volume Information After Creation
5.7.5
Hot Spare Registration
Register the hot spare for the failure of a drive.
The following two types of hot spare are available:
Global Hot Spare
•
This is available for any RAID group.
Dedicated Hot Spare
•
This is only available to a specified RAID group.
For a RAID group that contains important data, assign "Dedicated Hot Spare" in order to preferentially use
the hot spare.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
97
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0