Vacon NX series Applications Manual page 361

PARAMETER DESCRIPTIONS
Table 203: Selections for parameter ID1278
Selection
Selection name
number
0 Closed Loop speed control
Positive and negative frequency
1
limit
2 Ramp generator output (-/+)
Negative frequency limit –
3
Ramp generator output
Ramp generator output – Posi-
4
tive frequency limit
Ramp generator output with
5
window
6 0 – Ramp generator output
Ramp generator output with
7
window and On/Off limits
For the selection of this parameter in NXS drives, see ID644.
1285 POSITIVE FREQUENCY LIMIT 6 (2.6.20)
Maximum frequency limit for the drive. The parameter is available for NXP drives only.
1286 NEGATIVE FREQUENCY LIMIT 6 (2.6.19)
Minimum frequency limit for the drive. The parameter is available for NXP drives only.
1287 MOTORING TORQUE LIMIT 6 (2.6.22)
The maximum torque limit of the motoring side. The parameter is available for NXP drives
only.
1288 GENERATOR TORQUE LIMIT 6 (2.6.21)
The maximum torque limit of the generating side. The parameter is available for NXP drives
only.
1289 MOTORING POWER LIMIT 6 (2.6.23.20)
The maximum power limit of the generating side. For Closed Loop control mode only.
1290 GENERATOR POWER LIMIT 6 (2.6.23.19)
The maximum power limit of the motoring side. For Closed Loop control mode only.
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
VACON · 361
Description
8