Vacon NX series Applications Manual page 174

VACON · 174
Table 73: NXP drives: Closed Loop parameters (Control keypad: Menu M2 ->G2.6.23)
Index Parameter
Current control P
P2.6.23.17
gain
CurrentControl-
P2.6.23.18
Time
Generator power
P2.6.23.19
limit
Motoring power
P2.6.23.20
limit
Negative torque
P2.6.23.21
limit
Positive torque
P2.6.23.22
limit
P2.6.23.23 Flux off delay
P2.6.23.24 Stop state flux
P2.6.23.25 SPC f1 point
P2.6.23.26 SPC f0 point
P2.6.23.27 SPC Kp f0
P2.6.23.28 SPC Kp FWP
SPC torque mini-
P2.6.23.29
mum
SPC torque mini-
P2.6.23.30
mum Kp
P2.6.23.31 SPC Kp TC torque
P2.6.23.32 Flux reference
Speed error filter
P2.6.23.33
TC
6
Min Max Unit
0.00 320.00 %
0.0 3200.0 ms
0.0 300.0 %
0.0 300.0 %
0.0 300.0 %
0.0 300.0 %
-1 32000 s
0.0 150.00 %
0.00 320.00 Hz
0.00 320.0 Hz
0 1000 %
0 1000 %
0.0 400.0 %
0 1000 %
0 1000 ms
0.0 500.0 %
0 1000 ms
MULTI-PURPOSE CONTROL APPLICATION
Default Cust ID
40.00 617
1.5 657
300.0 1290
300.0 1289
300.0 645
300.0 646
0 1402
100.00 1401
0.00 1301
0.00 1300
100 1299
100 1298
0.0 1296
100 1295
0 1297
100.0 1250
0 1311
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
Description
Gain for the cur-
rent controller.
This controller is
active only in
closed loop and
advanced open
loop. It generates
the voltage vector
reference to the
modulator.
Current controller
integrator time
constant (0-1000) =
0-100.0 ms.
The maximum
power limit of the
generating side.
The maximum
power limit of the
motoring side.
-1 = Always